Displays a one-dimensional list of items. Supports scrolling, custom item renderers, and custom layouts.

Layouts may be, and are highly encouraged to be, virtual, meaning that the list view is capable of creating a limited number of item renderers to display a subset of the data provider that is currently visible, instead of creating a renderer for every single item. This allows for optimized performance with very large data providers.

The following example creates a list view, gives it a data provider, tells the item renderer how to interpret the data, and listens for when the selection changes:

var listView = new ListView();

listView.dataProvider = new ArrayCollection([
	{ text: "Milk" },
	{ text: "Eggs" },
	{ text: "Bread" },
	{ text: "Chicken" },
]);

listView.itemToText = (item:Dynamic) -> {
	return item.text;
};

listView.addEventListener(Event.CHANGE, (event:Event) -> {
	var listView = cast(event.currentTarget, ListView);
	trace("ListView changed: " + listView.selectedIndex + " " + listView.selectedItem.text);
});

this.addChild(listView);

Events:

openfl.events.Event.CHANGE

Dispatched when either ListView.selectedItem or ListView.selectedIndex changes.

feathers.events.ListViewEvent.ITEM_TRIGGER

Dispatched when the user taps or clicks an item renderer in the list view. The pointer must remain within the bounds of the item renderer on release, and the list view cannot scroll before release, or the gesture will be ignored.

Available since

1.0.0

.

See also:

Static variables

@:value("listView_itemRenderer")staticfinalread onlyCHILD_VARIANT_ITEM_RENDERER:String = "listView_itemRenderer"

The variant used to style the list view's item renderers in a theme.

To override this default variant, set the ListView.customItemRendererVariant property.

Available since

1.0.0

.

See also:

@:value("border")staticfinalread onlyVARIANT_BORDER:String = "border"

A variant used to style the list view with a border. This variant is used by default on desktop.

The following example uses this variant:

var listView = new ListView();
listView.variant = ListView.VARIANT_BORDER;
Available since

1.0.0

.

See also:

@:value("borderless")staticfinalread onlyVARIANT_BORDERLESS:String = "borderless"

A variant used to style the list view without a border. The variant is used by default on mobile.

The following example uses this variant:

var listView = new ListView();
listView.variant = ListView.VARIANT_BORDERLESS;
Available since

1.0.0

.

See also:

@:value("popUp")staticfinalread onlyVARIANT_POP_UP:String = "popUp"

A variant used to style the list view as a pop-up.

The following example uses this variant:

var listView = new ListView();
listView.variant = ListView.VARIANT_POP_UP;
Available since

1.0.0

.

See also:

Constructor

new(?dataProvider:IFlatCollection<Dynamic>, ?changeListener:Event ‑> Void)

Creates a new ListView object.

Available since

1.0.0

.

Variables

allowMultipleSelection:Bool

Determines if multiple items may be selected at the same time. Has no effect if selectable is false.

In the following example, multiple selection is enabled:

listView.allowMultipleSelection = true;
Available since

1.0.0

.

See also:

@:style@:flash.propertycustomItemRendererVariant:String

A custom variant to set on all item renderers, instead of ListView.CHILD_VARIANT_ITEM_RENDERER.

The customItemRendererVariant will be not be used if the result of itemRendererRecycler.create() already has a variant set.

Available since

1.0.0

.

See also:

dataProvider:IFlatCollection<Dynamic>

The collection of data displayed by the list view.

Items in the collection must be class instances or anonymous structures. Do not add primitive values (such as strings, booleans, or numeric values) directly to the collection.

Additionally, all items in the collection must be unique object instances. Do not add the same instance to the collection more than once because a runtime exception will be thrown.

The following example passes in a data provider and tells the item renderer how to interpret the data:

listView.dataProvider = new ArrayCollection([
	{ text: "Milk" },
	{ text: "Eggs" },
	{ text: "Bread" },
	{ text: "Chicken" },
]);

listView.itemToText = (item:Dynamic) -> {
	return item.text;
};
Available since

1.0.0

.

See also:

itemRendererRecycler:AbstractDisplayObjectRecycler<Dynamic, ListViewItemState, DisplayObject>

Manages item renderers used by the list view.

In the following example, the list view uses a custom item renderer class:

listView.itemRendererRecycler = DisplayObjectRecycler.withClass(CustomItemRenderer);
Available since

1.0.0

.

@:style@:flash.propertylayout:ILayout

The layout algorithm used to position and size the list view's items.

By default, if no layout is provided by the time that the list view initializes, a default layout that displays items vertically will be created.

The following example tells the list view to use a horizontal layout:

var layout = new HorizontalListLayout();
layout.gap = 20.0;
layout.padding = 20.0;
listView.layout = layout;
Available since

1.0.0

.

@:value(true)pointerSelectionEnabled:Bool = true

Indicates if selection is changed with MouseEvent.CLICK or TouchEvent.TOUCH_TAP when the item renderer does not implement the IToggle interface. If set to false, all item renderers must control their own selection manually (not only ones that implement IToggle).

The following example disables pointer selection:

listView.pointerSelectionEnabled = false;
Available since

1.0.0

.

selectable:Bool

Determines if items in the list view may be selected. By default only a single item may be selected at any given time. In other words, if item A is already selected, and the user selects item B, item A will be deselected automatically.

The following example disables selection of items in the list view:

listView.selectable = false;

See also:

@:bindable("change")selectedIndices:Array<Int>

Contains all of the indices that are currently selected. The most recently selected index will appear at the beginning of the array. In other words, the indices are in the reverse order that they were selected by the user.

When the selectedIndices array contains multiple items, the selectedIndex property will return the first item from selectedIndices.

Available since

1.0.0

.

See also:

@:bindable("change")selectedItem:Dynamic

@:bindable("change")selectedItems:Array<Dynamic>

Contains all of the items that are currently selected. The most recently selected item will appear at the beginning of the array. In other words, the items are in the reverse order that they were selected by the user.

When the selectedItems array contains multiple items, the selectedItem property will return the first item from selectedItems.

Available since

1.0.0

.

See also:

virtualLayout:Bool

Indicates if the list view's layout is allowed to virtualize items or not.

The following example disables virtual layouts:

listView.virtualLayout = false;
Available since

1.0.0

.

itemRendererRecyclerIDFunction:(state:ListViewItemState) ‑> String

When a list view requires multiple item renderer types, this function is used to determine which type of item renderer is required for a specific item. Returns the ID of the item renderer recycler to use for the item, or null if the default itemRendererRecycler should be used.

The following example provides an itemRendererRecyclerIDFunction:

var regularItemRecycler = DisplayObjectRecycler.withClass(ItemRenderer);
var firstItemRecycler = DisplayObjectRecycler.withClass(MyCustomItemRenderer);

listView.setItemRendererRecycler("regular-item", regularItemRecycler);
listView.setItemRendererRecycler("first-item", firstItemRecycler);

listView.itemRendererRecyclerIDFunction = function(state:ListViewItemState):String {
	if(state.index == 0) {
		return "first-item";
	}
	return "regular-item";
};
Available since

1.0.0

.

See also:

Methods

getItemRendererRecycler(id:String):DisplayObjectRecycler<Dynamic, ListViewItemState, DisplayObject>

Returns the item renderer recycler associated with a specific ID. Returns null if no recycler is associated with the ID.

Available since

1.0.0

.

See also:

indexToItemRenderer(index:Int):DisplayObject

Returns the current item renderer used to render the item at the specified index in the data provider. May return null if an item doesn't currently have an item renderer.

Note: Most list views use "virtual" layouts, which means that only the currently-visible subset of items will have an item renderer. As the list view scrolls, the items with item renderers will change, and item renderers may even be re-used to display different items.

Available since

1.0.0

.

itemRendererToItem(itemRenderer:DisplayObject):Dynamic

Returns the current item from the data provider that is rendered by a specific item renderer.

Available since

1.0.0

.

itemToItemRenderer(item:Dynamic):DisplayObject

Returns the current item renderer used to render a specific item from the data provider. May return null if an item doesn't currently have an item renderer.

Note: Most list views use "virtual" layouts, which means that only the currently-visible subset of items will have an item renderer. As the list view scrolls, the items with item renderers will change, and item renderers may even be re-used to display different items.

Available since

1.0.0

.

dynamicitemToText(data:Dynamic):String

Converts an item to text to display within list view. By default, the toString() method is called to convert an item to text. This method may be replaced to provide custom text.

For example, consider the following item:

{ text: "Example Item" }

If the ListView should display the text "Example Item", a custom implementation of itemToText() might look like this:

listView.itemToText = (item:Dynamic) -> {
	return item.text;
};
Available since

1.0.0

.

scrollToIndex(index:Int, ?animationDuration:Float):Void

Scrolls the list view so that the specified item renderer is completely visible. If the item renderer is already completely visible, does not update the scroll position.

A custom animation duration may be specified. To update the scroll position without animation, pass a value of 0.0 for the duration.

Available since

1.0.0

.

setItemRendererRecycler(id:String, recycler:AbstractDisplayObjectRecycler<Dynamic, ListViewItemState, DisplayObject>):Void

Associates an item renderer recycler with an ID to allow multiple types of item renderers may be displayed in the list view. A custom itemRendererRecyclerIDFunction may be specified to return the ID of the recycler to use for a specific item in the data provider.

To clear a recycler, pass in null for the value.

Available since

1.0.0

.

See also:

Inherited Variables

Defined by BaseScrollContainer

@:style@:flash.propertyautoHideScrollBars:Bool

Determines if the scroll bars should be automatically hidden after scrolling has ended, whether it was through user interaction or animation.

In the following example, scroll bar auto-hiding is disabled:

container.autoHideScrollBars = false;

This property has no effect if fixedScrollBars is true. Fixed scroll bars are always visible. Similarly, if showScrollBars is false, then the scroll bars are always hidden.

Available since

1.0.0

.

@:style@:flash.propertybackgroundSkin:DisplayObject

The default background skin to display behind all content added to the group. The background skin is resized to fill the complete width and height of the group.

The following example passes a bitmap for the container to use as a background skin:

group.backgroundSkin = new Bitmap(bitmapData);
Available since

1.0.0

.

See also:

@:style@:flash.propertydisabledBackgroundSkin:DisplayObject

The default background skin to display behind all content added to the group. The background skin is resized to fill the complete width and height of the group.

The following example gives the group a disabled background skin:

group.disabledBackgroundSkin = new Bitmap(bitmapData);
group.enabled = false;
Available since

1.0.0

.

See also:

@:style@:flash.propertyfixedScrollBars:Bool

Determines if the scroll bars are fixed to the edges of the container, without overlapping the container's content, or if the scroll bars are floating above the container's content.

In the following example, the scroll bars are fixed:

container.fixedScrollBars = true;

This property has no effect if showScrollBars is false.

Available since

1.0.0

.

@:style@:flash.propertyhideScrollBarDuration:Float

The duration, measured in seconds, of the animation when a scroll bar fades out.

In the following example, the duration of the animation that hides the scroll bars is set to 500 milliseconds:

container.hideScrollBarDuration = 0.5;
Available since

1.0.0

.

@:style@:flash.propertyhideScrollBarEase:IEasing

The easing function used for hiding the scroll bars, if applicable.

In the following example, the ease of the animation that hides the scroll bars is customized:

container.hideScrollBarEase = Elastic.easeOut;
Available since

1.0.0

.

@:style@:flash.propertymaskSkin:DisplayObject

A skin to mask the content of the container. The skin is resized to the full dimensions of the container. It is passed to the mask property.

This property masks the entire container, including any chrome such as scroll bars or headers and footers. To mask only the scrollable region, use viewPortMaskSkin instead.

The following example passes a RectangleSkin with a cornerRadius for the container's mask skin:

var maskSkin = new RectangleSkin();
maskSkin.fill = SolidColor(0xff0000);
maskSkin.cornerRadius = 10.0;
container.maskSkin = maskSkin;
Available since

1.0.0

.

See also:

read onlymaxScrollX:Float

The number of pixels the container may be scrolled horizontally in the rightward direction. This value is automatically calculated based on the bounds of the container's viewport.

The scrollX property may have a higher value than the maximum if the elasticEdges property is enabled. However, once the user stops interacting with the container, it will automatically animate back to the maximum position.

Available since

1.0.0

.

See also:

read onlymaxScrollY:Float

The number of pixels the container may be scrolled vertically in the downward direction. This value is automatically calculated based on the bounds of the container's viewport.

The scrollY property may have a higher value than the maximum if the elasticEdges property is enabled. However, once the user stops interacting with the container, it will automatically animate back to the maximum position.

Available since

1.0.0

.

See also:

read onlyminScrollX:Float

The number of pixels the container may be scrolled horizontally in the leftward direction. This value is automatically calculated based on the bounds of the container's viewport.

The scrollX property may have a lower value than the minimum if the elasticEdges property is enabled. However, once the user stops interacting with the container, it will automatically animate back to the minimum position.

Available since

1.0.0

.

See also:

read onlyminScrollY:Float

The number of pixels the container may be scrolled vertically in the upward direction. This value is automatically calculated based on the bounds of the container's viewport.

The scrollY property may have a lower value than the minimum if the elasticEdges property is enabled. However, once the user stops interacting with the container, it will automatically animate back to the minimum position.

Available since

1.0.0

.

See also:

@:style@:flash.propertypaddingBottom:Float

The minimum space, in pixels, between the container's bottom edge and the container's content.

In the following example, the container's bottom padding is set to 20 pixels:

container.paddingBottom = 20.0;
Available since

1.0.0

.

@:style@:flash.propertypaddingLeft:Float

The minimum space, in pixels, between the container's left edge and the container's content.

In the following example, the container's left padding is set to 20 pixels:

container.paddingLeft = 20.0;
Available since

1.0.0

.

@:style@:flash.propertypaddingRight:Float

The minimum space, in pixels, between the container's right edge and the container's content.

In the following example, the container's right padding is set to 20 pixels:

container.paddingRight = 20.0;
Available since

1.0.0

.

@:style@:flash.propertypaddingTop:Float

The minimum space, in pixels, between the container's top edge and the container's content.

In the following example, the container's top padding is set to 20 pixels:

container.paddingTop = 20.0;
Available since

1.0.0

.

@:bindable("scroll")restrictedScrollX:Float

Setting scrollX will clamp the value between minScrollX and maxScrollX, but setting unrestrictedScrollX will allow values outside of that range.

Available since

1.0.0

.

See also:

@:bindable("scroll")restrictedScrollY:Float

Setting restrictedScrollY will clamp the value to the range between minScrollY and maxScrollY.

Available since

1.0.0

.

See also:

scrollBarXFactory:AbstractDisplayObjectFactory<Dynamic, HScrollBar>

Creates the horizontal scroll bar. The horizontal scroll bar may be any implementation of IScrollBar, but typically, the feathers.controls.HScrollBar component is used.

In the following example, a custom horizontal scroll bar factory is passed to the container:

container.scrollBarXFactory = () ->
{
	return new HScrollBar();
};
Available since

1.0.0

.

See also:

@:style@:flash.propertyscrollBarXPosition:RelativePosition

Determines the edge of the container where the horizontal scroll bar will be positioned (either on the top or the bottom).

In the following example, the horizontal scroll bar is positioned on the top edge of the container:

container.scrollBarXPosition = TOP;
Available since

1.0.0

.

See also:

scrollBarYFactory:AbstractDisplayObjectFactory<Dynamic, VScrollBar>

Creates the vertical scroll bar. The vertical scroll bar may be any implementation of IScrollBar, but typically, the feathers.controls.VScrollBar component is used.

In the following example, a custom vertical scroll bar factory is passed to the container:

container.scrollBarYFactory = () ->
{
	return new VScrollBar();
};
Available since

1.0.0

.

See also:

@:style@:flash.propertyscrollBarYPosition:RelativePosition

Determines the edge of the container where the vertical scroll bar will be positioned (either on the left or the right).

In the following example, the vertical scroll bar is positioned on the left edge of the container:

container.scrollBarYPosition = LEFT;
Available since

1.0.0

.

See also:

scrollMode:ScrollMode

Determines how scrolling is rendered by the container.

In the following example, scroll mode is changed to use a scrollRect:

container.scrollMode = SCROLL_RECT;
Available since

1.0.0

.

@:style@:flash.propertyscrollPixelSnapping:Bool

If enabled, the scroll position will always be adjusted to the nearest pixel in stage coordinates.

In the following example, the scroll position is snapped to pixels:

container.scrollPixelSnapping = true;
Available since

1.0.0

.

scrollPolicyX:ScrollPolicy

Determines whether the container may scroll horizontally (on the x-axis) or not.

In the following example, horizontal scrolling is disabled:

container.scrollPolicyX = OFF;
Available since

1.0.0

.

See also:

scrollPolicyY:ScrollPolicy

Determines whether the container may scroll vertically (on the y-axis) or not.

In the following example, vertical scrolling is disabled:

container.scrollPolicyY = OFF;
Available since

1.0.0

.

See also:

scrollStepX:Float

The number of pixels the horizontal scroll position can be adjusted by a step (such as with the left/right keyboard arrow keys, or a step button on the horizontal scroll bar).

In the following example, the horizontal scroll step is set to 20 pixels:

container.scrollStepX = 20.0;
Available since

1.0.0

.

scrollStepY:Float

The number of pixels the vertical scroll position can be adjusted by a step (such as with the up/down keyboard arrow keys, or a step button on the vertical scroll bar).

In the following example, the vertical scroll step is set to 20 pixels:

container.scrollStepY = 20.0;
Available since

1.0.0

.

@:bindable("scroll")scrollX:Float

The number of pixels the container has been scrolled horizontally (on the x-axis).

When setting scrollX, the new value will be automatically clamped to the range between minScrollX and maxScrollX. To programmatically set a scrollX to a value outside of that range, set unrestrictedScrollX instead.

When the value of scrollX changes, the container dispatches an event of type ScrollEvent.SCROLL. This event is dispatched when other scroll position properties change too.

In the following example, the horizontal scroll position is modified immediately, without being animated:

container.scrollX = 100.0;
Available since

1.0.0

.

See also:

@:bindable("scroll")scrollY:Float

The number of pixels the container has been scrolled vertically (on the y-axis).

When the value of scrollY changes, the container dispatches an event of type ScrollEvent.SCROLL. This event is dispatched when other scroll position properties change too.

In the following example, the vertical scroll position is modified immediately, without being animated:

container.scrollY = 100.0;
Available since

1.0.0

.

See also:

scrollerFactory:() ‑> Scroller

Creates the Scroller utility that manages touch and mouse wheel scrolling.

In the following example, a custom scroller factory is passed to the container:

container.scrollerFactory = () ->
{
	var scroller = new Scroller();
	scroller.elasticEdges = false;
	return scroller;
};
Available since

1.0.0

.

@:style@:flash.propertyshowScrollBarMinimumDuration:Float

The minimum time, in seconds, that the scroll bars will be shown, if autoHideScrollBars is enabled.

In the following example, the minimum duration to show scroll bars is increased:

container.showScrollBarMinimumDuration = 1.0;
Available since

1.0.0

.

See also:

@:style@:flash.propertyshowScrollBars:Bool

Determines if scroll bars are displayed or not.

In the following example, the scroll bars are hidden:

container.showScrollBars = false;
Available since

1.0.0

.

private@:dox(show)viewPort:IViewPort

The display object rendered and scrolled within the container, provided by a subclass of BaseScrollContainer.

Available since

1.0.0

.

@:style@:flash.propertyviewPortMaskSkin:DisplayObject

A skin to mask the view port (the scrollable region) of the container. The skin is resized to the dimensions of the view port only, and it does not affect any other chrome, such as scroll bars or a header or footer. It is passed to the mask property.

The following example passes a RectangleSkin with a cornerRadius for the container view port's mask skin:

var maskSkin = new RectangleSkin();
maskSkin.fill = SolidColor(0xff0000);
maskSkin.cornerRadius = 10.0;
container.viewPortMaskSkin = maskSkin;
Available since

1.0.0

.

See also:

Defined by FeathersControl

@:bindable("creationComplete")read onlycreated:Bool

Determines if the component has been initialized and validated for the first time.

In the following example, we check if the component is created or not, and we listen for an event if it isn't:

if(!control.created)
{
	control.addEventListener(FeathersEventType.CREATION_COMPLETE, creationCompleteHandler);
}

See also:

@:value(null)@:styledisabledAlpha:Null<Float> = null

When disabledAlpha is not null, sets the alpha property to this value when the the enabled property is set to false.

Available since

1.0.0

.

@stylefocusPaddingBottom:Float

Optional padding outside the bottom edge of this UI component when the focusRectSkin is visible.

Available since

1.0.0

.

@stylefocusPaddingLeft:Float

Optional padding outside the left edge of this UI component when the focusRectSkin is visible.

Available since

1.0.0

.

@stylefocusPaddingRight:Float

Optional padding outside the right edge of this UI component when the focusRectSkin is visible.

Available since

1.0.0

.

@stylefocusPaddingTop:Float

Optional padding outside the top edge of this UI component when the focusRectSkin is visible.

Available since

1.0.0

.

@stylefocusRectSkin:DisplayObject

An optional skin to display when an IFocusObject component receives focus.

Available since

1.0.0

.

@:bindable("layoutDataChange")includeInLayout:Bool

@:bindable("initialize")read onlyinitialized:Bool

Determines if the component has been initialized yet. The initialize() function is called one time only, when the Feathers UI control is added to the display list for the first time.

In the following example, we check if the component is initialized or not, and we listen for an event if it isn't initialized:

if(!control.initialized)
{
	control.addEventListener(FeathersEvent.INITIALIZE, initializeHandler);
}
Available since

1.0.0

.

See also:

@style@:bindable("layoutDataChange")layoutData:ILayoutData

read onlystyleContext:Class<IStyleObject>

The class used as the context for styling the component. If a subclass of a component should have different styles than its superclass, it should override the get_styleContext getter. However, if a subclass should continue using the same styles as its superclass, it happens automatically.

Available since

1.0.0

.

styleProvider:IStyleProvider

Typically used by the theme to provide styles to each component, but a custom style provider may be provided that will take precedence over the theme's style provider.

When a component initializes, its style provider sets properties that affect the component's visual appearance. If the style provider dispatches StyleProviderEvent.STYLES_CHANGE after the component has initialized, the original properties set by the style provider will be reset to their default values and before applying the new property values.

Setting the style provider or replacing an existing style provider before a component initializes will queue up the style changes until after initialization. Once a component initializes, the style provider may be changed, but the changes will be applied immediately. Similarly to when a style provider dispatcches StyleProviderEvent.STYLES_CHANGE, any properties that were set by the previous style provider will be reset to their default values before applying the new style provider.

If the themeEnabled property is false, the current theme's style provider will be ignored. However, if a custom style provider was provided from outside of the theme, it will still be used.

Available since

1.0.0

.

See also:

variant:String

May be used to provide multiple different variations of the same UI component, each with a different appearance.

Available since

1.0.0

.

Defined by MeasureSprite

Defined by ValidatingSprite

read onlyvalidating:Bool

Indicates if the display object is currently validating.

Available since

1.0.0

.

Inherited Methods

Defined by BaseScrollContainer

@:value({ result : null })getViewPortVisibleBounds(?result:Rectangle):Rectangle

Returns the visible bounds of the view port within the container's local coordinate system.

Available since

1.0.0

.

setPadding(value:Float):Void

Defined by FeathersControl

private@:dox(show)initialize():Void

Called the first time that the UI control is added to the stage, and you should override this function to customize the initialization process. Do things like create children and set up event listeners. After this function is called, `FeathersEvent.INITIALIZE is dispatched.

The following example overrides initialization:

override private function initialize():Void {
	super.initialize();

}
Available since

1.0.0

.

See also:

move(x:Float, y:Float):Void

Sets both the x and y positions of the control in a single function call.

Available since

1.0.0

.

See also:

  • DisplayObject.x

  • DisplayObject.y

setFocusPadding(value:Float):Void

setSize(width:Float, height:Float):Void

Sets both the width and height dimensions of the control in a single function call.

Available since

1.0.0

.

See also:

  • DisplayObject.width

  • DisplayObject.height

private@:dox(show)setStyle(styleName:String, ?state:EnumValue):Bool

Determines if a style may be changed, and restricts the style from being changed in the future, if necessary.

Available since

1.0.0

.

Defined by MeasureSprite

private@:value({ minHeight : 0.0, minWidth : 0.0 })@:dox(show)saveMeasurements(width:Float, height:Float, minWidth:Float = 0.0, minHeight:Float = 0.0, ?maxWidth:Float, ?maxHeight:Float):Bool

Saves the calculated dimensions for the component, replacing any values that haven't been set explicitly. Returns true if the reported values have changed and Event.RESIZE was dispatched.

Available since

1.0.0

.

Defined by ValidatingSprite

isInvalid(?flag:InvalidationFlag):Bool

Indicates whether the control is pending validation or not. By default, returns true if any invalidation flag has been set. If you pass in a specific flag, returns true only if that flag has been set (others may be set too, but it checks the specific flag only. If all flags have been marked as invalid, always returns true.

The following example invalidates a component:

component.setInvalid();
trace(component.isInvalid()); // true
Available since

1.0.0

.

runWithoutInvalidation(callback:() ‑> Void):Void

Calls a function that temporarily disables invalidation. In other words, calls to setInvalid() will be ignored until the function returns.

Available since

1.0.0

.

setInvalid(?flag:InvalidationFlag):Void

Call this function to tell the UI control that a redraw is pending. The redraw will happen immediately before OpenFL renders the UI control to the screen. The validation system exists to ensure that multiple properties can be set together without redrawing multiple times in between each property change.

If you cannot wait until later for the validation to happen, you can call validate() to redraw immediately. As an example, you might want to validate immediately if you need to access the correct width or height values of the UI control, since these values are calculated during validation.

The following example invalidates a component:

component.setInvalid();
trace(component.isInvalid()); // true
Available since

1.0.0

.

private@:dox(show)setInvalidationFlag(flag:InvalidationFlag):Void

Sets an invalidation flag. This will not add the component to the validation queue. It only sets the flag. A subclass might use this function during draw() to manipulate the flags that its superclass sees.

Available since

1.0.0

.

See also:

private@:dox(show)update():Void

Override to customize layout and to adjust properties of children. Called when the component validates, if any flags have been marked to indicate that validation is pending.

The following example overrides updating after invalidation:

override private function update():Void {
	super.update();

}
Available since

1.0.0

.